2 Molex to 6-pin adapters are far from safe, although usable in some scenarios. For example – they need lots of space, are uncomfortably bulky, and sometimes problematic to disconnect. Molex connectors are not actually bad, but they do have some disadvantages. If so, the plastic shielding is most likely to melt and on fire. When the Molex to SATA adapters do not have the proper shielding, it can possibly make space for any electrical incident between the ground and 12V and 5.5V lines. Frequently Asked Questions (FAQs) How many watts can a Molex 6 pin handle?Ī Molex 6-pin connector can handle up to 75 watts, which is nearly twice the 4-pin connector.

Therefore, it is by no means suitable for mining, a job that pushes the GPU to its limits. Even when running GPU-hungry games, the Molex connector heats up excessively. Thus, it sure is incapable of handling extensive computational tasks. Powering a GPU for day-to-day use is a big challenge for Molex to 6-pin adapters.

And if that continues, your graphics card may end up damaged. So, even if you manage to connect it to a graphics card through 2 Molex to 6-pin adapters, you might be dealing with low power delivery. Moreover, if your PSU lacks 6-pin or 8-pin PCIe (Peripheral Component Interconnect Express) connectors, there’s a high chance it has a low power rating. Yet, they are hard to recommend if you want to power a high-end GPU. Usually, these are a bit safer than the previously mentioned ones. That way, the clamps make contact with the conductor. On the other hand, the second quality comes with metal clamp-like connections that cut into the wire’s plastic layer. Though such a finish gives the idea that the adapter is of high quality, such adaptations are prone to catching fire. The first kind will have the wires get into the plastic molding on its edge. For example, you will find two main types of Molex to 6-pin adapters. In reality, however, the failure rate of such adapters is pretty high due to poor build quality. That means the adapter is less likely to fail. Considering 6-pin PCI-e connectors that work with 75 watts, 2 Molex to 6-pin adapters should withstand the power delivery. In reality, however, the failure rate of such adapters is. Generally, the rated current for Molex connectors is 5amps, meaning it can take on a maximum of 5A×12v = 60 watts. Generally, the rated current for Molex connectors is 5amps, meaning it can take on a maximum of 5A×12v 60 watts. So, even though using an adapter can get the job done, you cannot stop the connector from overheating. But the reality is that Molex connectors are suitable for low-power delivery. Many experts will try to sell the idea that you can get away with using a Molex connector to power PCIe-compatible equipment.

Molex 6 pin connector